EN Series - NSK Rolling Bearing

??

CAD-Modellauswahl

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17

		LINA Stückliste	STAN Standard ⁿ/ₐ	ORDER Bearing No. ⁿ/ₐ	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Width [mm]	C Width [mm]	T Width [mm]	R Chamfer Dimension [mm]	R1 Chamfer Dimension [mm]	CR1 Basic Dynamic Load Ratings [N]	COR1 Basic Static Load Ratings [N]	CR2 Basic Dynamic Load Ratings [kgf]	COR2 Basic Static Load Ratings [kgf]	LG Limiting Speed Grease [rpm]	LO Limiting Speed Oil [rpm]	DA1 Abutment and Fillet Dimensions min. [mm]	DA2 Abutment and Fillet Dimensions min. [mm]	RA Abutment and Fillet Dimensions min. [mm]	MASS Mass [kg]

		EN4	-	EN4	4	16	5	5	5	0.15	0.10	1650	288	168	29	34000	40000	5.2	14.8	0.15	0.005
		EN5	-	EN5	5	16	5	5	5	0.15	0.10	1650	288	168	29	34000	40000	6.2	14.8	0.15	0.004
		EN6	-	EN6	6	21	7	7	7	0.30	0.15	2490	445	254	46	30000	36000	8.0	19.0	0.30	0.011
		EN7	-	EN7	7	22	7	7	7	0.30	0.15	2490	445	254	46	30000	36000	9.0	20.0	0.30	0.013
		EN8	-	EN8	8	24	7	7	7	0.30	0.15	3450	650	350	66	28000	34000	10.0	22.0	0.30	0.014
		EN9	-	EN9	9	28	8	8	8	0.30	0.15	4550	880	465	90	24000	30000	11.0	26.0	0.30	0.022
		EN10	-	EN10	10	28	8	8	8	0.30	0.15	4550	880	465	90	24000	30000	12.0	26.0	0.30	0.021
		EN11	-	EN11	11	32	7	7	7	0.30	0.15	4400	845	450	86	22000	26000	13.0	30.0	0.30	0.029
		EN12	-	EN12	12	32	7	7	7	0.30	0.15	4400	845	450	86	22000	26000	14.0	30.0	0.30	0.028
		EN13	-	EN13	13	30	7	7	7	0.30	0.15	4400	845	450	86	22000	26000	15.0	28.0	0.30	0.021
		EN14	-	EN14	14	35	8	8	8	0.30	0.15	5800	1150	590	117	19000	22000	16.0	33.0	0.30	0.035
		EN15	-	EN15	15	35	8	8	8	0.30	0.15	5800	1150	590	117	19000	22000	17.0	33.0	0.30	0.034
		EN16	-	EN16	16	38	10	10	10	0.60	0.20	6900	1380	705	141	17000	22000	20.0	34.0	0.60	0.049
		EN17	-	EN17	17	44	11	11	11	0.60	0.30	7350	1500	750	153	16000	19000	21.0	40.0	0.60	0.080
		EN18	-	EN18	18	40	9	9	9	0.60	0.20	5050	1030	515	105	17000	20000	22.0	36.0	0.60	0.051
		EN19	-	EN19	19	40	9	9	9	0.60	0.20	5050	1030	515	105	17000	20000	23.0	36.0	0.60	0.049
		EN20	-	EN20	20	47	12	12	12	1.00	0.60	11000	2380	1120	243	14000	17000	25.0	42.0	1.00	0.089

Zusätzliche Informationen

Benutzer, die sich dieses Teil angesehen haben, interessierten sich auch für die folgenden Teile