CP - Clamping Plate - DMS Diemould (UK)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	PARTNO Part No. ⁿ/ₐ	MAT Material ⁿ/ₐ	T Thickness [mm]	X Width [mm]	Y Length [mm]	X1 Pillar Hole Width Distance [mm]	X2 Screw Hole Width Distance [mm]	Y1 Pillar Hole Length Distance [mm]	Y2 Screw Hole Length Distance [mm]	PG1 Counterbore Diameter [mm]	PT1 Bore Diameter [mm]	VG1 Counterbore Depth [mm]	D1 Pillar Hole Diameter [mm]	D3 Locating Ring Hole Diameter [mm]	D4 Sprue Bushing Diameter [mm]	T3 Locating Ring Hole Depth [mm]

		CP99 F	CP99 F	N8	16	95	95	75	75	75	45	11.25	7	6.5	14	0	0	0
		CP99 H	CP99 H	N8	16	125	125	75	75	75	45	11.25	7	6.5	14	0	0	0
		CP99 V	CP99 V	N8	16	125	125	75	75	75	45	11.25	7	6.5	14	0	0	0
		CP1012 F	CP1012 F	N8	16	100	125	80	80	103	67	11.25	7	6.5	14	0	0	0
		CP1012 V	CP1012 V	N8	16	100	156	80	80	103	67	11.25	7	6.5	14	0	0	0
		CP1012 OSV	CP1012 OSV	N8	16	100	196	80	80	103	67	11.25	7	6.5	14	0	0	0
		CP1012 H	CP1012 H	N8	16	125	125	80	80	103	67	11.25	7	6.5	14	0	0	0
		CP1012 OSH	CP1012 OSH	N8	16	156	125	80	80	103	67	11.25	7	6.5	14	0	0	0
		CP1212 F	CP1212 F	N8	16	125	125	96	96	95	45	14.25	9	8.5	20	0	0	0
		CP1212 V	CP1212 V	N8	16	125	156	96	96	95	45	14.25	9	8.5	20	0	0	0
		CP1212 OSV	CP1212 OSV	N8	16	125	196	96	96	95	45	14.25	9	8.5	20	0	0	0
		CP1212 H	CP1212 H	N8	16	156	125	96	96	95	45	14.25	9	8.5	20	0	0	0
		CP1212 OSH	CP1212 OSH	N8	16	196	125	96	96	95	45	14.25	9	8.5	20	0	0	0
		CP1215 F	CP1215 F	N8	16	125	156	96	96	126	76	14.25	9	8.5	20	0	0	0
		CP1215 V	CP1215 V	N8	16	125	196	96	96	126	76	14.25	9	8.5	20	0	0	0
		CP1215 OSV	CP1215 OSV	N8	16	125	246	96	96	126	76	14.25	9	8.5	20	0	0	0
		CP1215 H	CP1215 H	N8	16	156	156	96	96	126	76	14.25	9	8.5	20	0	0	0
		CP1215 OSH	CP1215 OSH	N8	16	196	156	96	96	126	76	14.25	9	8.5	20	0	0	0
		CP1515 F	CP1515 F	N8	20	156	156	122	122	122	72	17.25	11	10.5	20	0	0	0
		CP1515 FA	CP1515 FA	N8	26	156	156	122	122	122	72	17.25	11	10.5	20	0	0	0
		CP1515 V	CP1515 V	N8	20	156	196	122	122	122	72	17.25	11	10.5	20	0	0	0
		CP1515 OSV	CP1515 OSV	N8	20	156	246	122	122	122	72	17.25	11	10.5	20	0	0	0
		CP1515 H	CP1515 H	N8	20	196	156	122	122	122	72	17.25	11	10.5	20	0	0	0
		CP1515 HR	CP1515 HR	N8	20	196	156	122	122	122	72	17.25	11	10.5	20	90	38	3
		CP1515 OSH	CP1515 OSH	N8	20	246	156	122	122	122	72	17.25	11	10.5	20	0	0	0

Additional Information

Users who viewed this, were also interested in

DMS Diemould (UK)

R - RiserDMS Diemould (UK) 21.06.2022

DMS Diemould (UK)

A - Cavity Core Plate

A - Cavity Core PlateDMS Diemould (UK) 21.06.2022

DMS Diemould (UK)

ES - Ejector Plate

ES - Ejector PlateDMS Diemould (UK) 21.06.2022

DMS Diemould (UK)

BP - Support Plate

BP - Support PlateDMS Diemould (UK) 21.06.2022

DMS Diemould (UK)

B - Cavity Core Plate

B - Cavity Core PlateDMS Diemould (UK) 21.06.2022

DMS Diemould (UK)

SGP - Spiggoted Guide Pillar

SGP - Spiggoted Guide PillarDMS Diemould (UK) 28.06.2017

DMS Diemould (UK)

SBR15 - Sprue Bush - Hard - Rad 15.5

SBR15 - Sprue Bush - Hard - Rad 15.5DMS Diemould (UK) 28.06.2017

DMS Diemould (UK)

LRI - Location Ring With Thru Hole - IG

LRI - Location Ring With Thru Hole - IGDMS Diemould (UK) 28.06.2017

DMS Diemould (UK)

CS - Cap Screws

CS - Cap ScrewsDMS Diemould (UK) 28.06.2017

DMS Diemould (UK)

AH - Ejector Pin Form A Hardened

AH - Ejector Pin Form A HardenedDMS Diemould (UK) 28.06.2017

FW 1850 Two-stage-ejector with stroke - DME

FW 1850 Two-stage-ejector with stroke - DMED-M-E 22.05.2024

KU Latch Locks - Baffle bars - DME

KU Latch Locks - Baffle bars - DMED-M-E 22.05.2024

DMS Diemould (UK)

AIT - Imperial Ejector Pin Form A Mouldmax

AIT - Imperial Ejector Pin Form A MouldmaxDMS Diemould (UK) 28.06.2017

DMS Diemould (UK)

MG - Mini Guide (CUMSA)

MG - Mini Guide (CUMSA)DMS Diemould (UK) 28.06.2017