FW 1850 Two-stage-ejector with stroke - DME - D-M-E

??

Seleção de modelos em CAD

	1
	2
	3
	4

		LINA Lista de peças	REF Catalog Number ⁿ/ₐ	D Diameter d [mm]	H1MAX H1 max [mm]	H1MIN H1 min [mm]	D1 Diameter d1 [mm]	D2 Thread d2 ⁿ/ₐ	D3 Diameter d3 [mm]	D4 Diameter d4 [mm]	D6 Thread d6 ⁿ/ₐ	D7 Diameter d7 [mm]	D8 Thread d8 ⁿ/ₐ	D9 Thread d9 ⁿ/ₐ	R Radius [mm]	L1 Length l1 [mm]	L2 Length l2 [mm]	L3 Length l3 [mm]	L4 Length l4 [mm]	L5 Length l5 [mm]	L6 Length l6 [mm]	L7MAX Length l7 max. [mm]	L8MAX Length l8 max. [mm]	L11 Length l1 1 [mm]	L12 Length l1 2 [mm]	SW1 Accross-flats dimension [mm]	SW2 Accross-flats dimension [mm]	SW3 Accross-flats dimension [mm]	SW3NM Force [Nm]	SW4 Accross-flats dimension [mm]	SW5 Accross-flats dimension [mm]	SW6 Accross-flats dimension [mm]

		FW1850050032	FW1850050032	50	32	5	18	M12	56	75	M40x1.5	31.5	M12x1.25	M6x16	31	42	12	58	14	25	17	36	50	180	37	14	14	36	120	46	6	27
		FW1850058040	FW1850058040	58	40	5	22	M16	64	90	M45x1.5	36.0	M14x1.5	M8x20	36	42	15	68	16	25	17	45	66	200	44	18	18	41	160	55	8	32
		FW1850058056	FW1850058056	58	56	5	22	M16	64	90	M45x1.5	36.0	M14x1.5	M8x20	36	58	15	84	16	25	17	45	66	250	44	18	18	41	120	55	8	32
		FW1850070071	FW1850070071	70	71	10	26	M20	79	100	M55x1.5	44.0	M16x1.5	M8x25	42	75	18	107	22	30	22	56	80	270	50	24	24	50	200	65	10	38

Additional Information

Os usuários que visualizaram isso também estavam interessados em

FW 1851 Two-stage-ejector with stroke - DME

FW 1851 Two-stage-ejector with stroke - DMED-M-E 27.11.2017

KL Klinkenzüge - DME

KL Klinkenzüge - DMED-M-E 22.05.2024

TSTL20A, TSTL26A, TSTL32A - 2 Stage Ejector Top Last (TSTL)

TSTL20A, TSTL26A, TSTL32A - 2 Stage Ejector Top Last (TSTL)D-M-E 24.05.2024

N Connector plugs with teflon seal - DME

N Connector plugs with teflon seal - DMED-M-E 22.05.2024

FW 1853 Ejector bolt - DME

FW 1853 Ejector bolt - DMED-M-E 27.11.2017

ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)

ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)D-M-E 08.08.2018

TL-20-Center Rod CR - DME

TL-20-Center Rod CR - DMED-M-E 27.11.2017

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material 1.2210

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material...D-M-E 27.05.2024

VA Vacuum-/Compressed air-valves - DME

VA Vacuum-/Compressed air-valves - DMED-M-E 22.05.2024

ST 15 Extension nipples - DME

ST 15 Extension nipples - DMED-M-E 08.08.2018

FN Connector plugs for FSK and FSVK - DME

FN Connector plugs for FSK and FSVK - DMED-M-E 22.05.2024

AEB Accelerated ejectors - bumper type - DME

AEB Accelerated ejectors - bumper type - DMED-M-E 27.11.2017

AEP Accelerated ejectors - Pin type - DME

AEP Accelerated ejectors - Pin type - DMED-M-E 27.11.2017

ULG T-gibs - DME - Mat.: 1.7225, Surface 60-70 HRC, Core 38-42 HRC

ULG T-gibs - DME - Mat.: 1.7225, Surface 60-70 HRC, Core 38-42 HRCD-M-E 22.05.2024