SN1855A-HSS - Schneidstempel (DIN ISO 8020 A) - STRACK

??

CAD Model seçimi

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		SN1855A-HSS-3-63 XL1=63	3	63	5	3	0.2		188344
		SN1855A-HSS-3-71 XL1=71	3	71	5	3	0.2		188345
		SN1855A-HSS-3-80 XL1=80	3	80	5	3	0.2		188346
		SN1855A-HSS-4-63 XL1=63	4	63	6	3	0.2		188347
		SN1855A-HSS-4-71 XL1=71	4	71	6	3	0.2		188348
		SN1855A-HSS-4-80 XL1=80	4	80	6	3	0.2		188349
		SN1855A-HSS-5-63 XL1=63	5	63	8	5	0.3		188350
		SN1855A-HSS-5-71 XL1=71	5	71	8	5	0.3		188351
		SN1855A-HSS-5-80 XL1=80	5	80	8	5	0.3		188352
		SN1855A-HSS-5-90 XL1=90	5	90	8	5	0.3		188353
		SN1855A-HSS-6-63 XL1=63	6	63	9	5	0.3		188354
		SN1855A-HSS-6-71 XL1=71	6	71	9	5	0.3		188355
		SN1855A-HSS-6-80 XL1=80	6	80	9	5	0.3		188356
		SN1855A-HSS-6-90 XL1=90	6	90	9	5	0.3		188357
		SN1855A-HSS-6-100 XL1=100	6	100	9	5	0.3		188358
		SN1855A-HSS-8-63 XL1=63	8	63	11	5	0.3		188359
		SN1855A-HSS-8-71 XL1=71	8	71	11	5	0.3		188360
		SN1855A-HSS-8-80 XL1=80	8	80	11	5	0.3		188361
		SN1855A-HSS-8-90 XL1=90	8	90	11	5	0.3		188362
		SN1855A-HSS-8-100 XL1=100	8	100	11	5	0.3		188363
		SN1855A-HSS-10-63 XL1=63	10	63	13	5	0.3		188364
		SN1855A-HSS-10-71 XL1=71	10	71	13	5	0.3		188365
		SN1855A-HSS-10-80 XL1=80	10	80	13	5	0.3		188366
		SN1855A-HSS-10-90 XL1=90	10	90	13	5	0.3		188367
		SN1855A-HSS-10-100 XL1=10...	10	100	13	5	0.3		188368

Additional Information

Bunu görüntüleyen kullanıcılar da ilgilendi

SN2512 - Raising washer

SN2512 - Raising washerSTRACK 10.06.2024

SN1872B-HSS - Cutting bush (ISO 8977 B)

SN1872B-HSS - Cutting bush (ISO 8977 B)STRACK 13.10.2022

SN1872A-HSS - Cutting bush (ISO 8977 A)

SN1872A-HSS - Cutting bush (ISO 8977 A)STRACK 13.10.2022

SN1870 - Punch guide bush (ISO 8978)

SN1870 - Punch guide bush (ISO 8978)STRACK 13.10.2022

Z98 - Ejector pin (DIN ISO 6751)

Z98 - Ejector pin (DIN ISO 6751)STRACK 13.10.2022

SN1830D-HSS - Cutting punch (DIN 9861 D)

SN1830D-HSS - Cutting punch (DIN 9861 D)STRACK 13.10.2022

SN1860B-HSS - Cutting punch (DIN ISO 8020 B)

SN1860B-HSS - Cutting punch (DIN ISO 8020 B)STRACK 13.10.2022

2201. - Punch, blank, ISO 8020

2201. - Punch, blank, ISO 8020FIBRO 27.02.2024

ISO 8020 ADanly 19.09.2023

Z148 - Guide screw

Z148 - Guide screwSTRACK 19.09.2022

SN1842-HSS - Punch with trombone collar

SN1842-HSS - Punch with trombone collarSTRACK 13.10.2022

268. - Punch with ejector pin, stepped, short point

268. - Punch with ejector pin, stepped, short pointFIBRO 21.07.2023

WZ 7075 Typ(e) DIN 9861-HSS, Material HSS 62 ± 2 HRC - Punches - hardened

WZ 7075 Typ(e) DIN 9861-HSS, Material HSS 62 ± 2 HRC - Punches - hardenedD-M-E 27.06.2024

SN1862F-HSS - Cutting punch (DIN ISO 8020 F)

SN1862F-HSS - Cutting punch (DIN ISO 8020 F)STRACK 13.10.2022