DDB01 - Thrust Washer - DAIDO METAL

??

Selezione modello CAD

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

		LINA Lista materiale	CNSORDERNO Parts No. ⁿ/ₐ	IDB Nominal I.D [mm]	ID Inner Diameter [mm]	IDT Inner Diameter Tolerance [mm]	OD Outer Diameter [mm]	ODT Outer Diameter Tolerance [mm]	T Thickness [mm]	TT Thickness Tolerance [mm]	D Knock Pin Hole Diameter [mm]	DT Knock Pin Hole Diameter Tolerance [mm]	PCD Knock Pin Hole P.C.D. [mm]	PCDT Knock Pin Hole P.C.D. Tolerance [mm]	HRD Housing Recess Depth [mm]	HRDT Housing Recess Depth Tolerance [mm]

		DBB10W	DBB10W	10	12	+0.25/0	24	0/-0.25	1.5	-0.05/-0.20	1.6	+0.45/+0.20	18	±0.12	1.1	0/-0.25
		DBB12W	DBB12W	12	14	+0.25/0	26	0/-0.25	1.5	-0.05/-0.20	2.0	+0.45/+0.20	20	±0.12	1.1	0/-0.25
		DBB14W	DBB14W	14	16	+0.25/0	30	0/-0.25	1.5	-0.05/-0.20	2.0	+0.45/+0.20	23	±0.12	1.1	0/-0.25
		DBB16W	DBB16W	16	18	+0.25/0	32	0/-0.25	1.5	-0.05/-0.20	2.0	+0.45/+0.20	25	±0.12	1.1	0/-0.25
		DBB18W	DBB18W	18	20	+0.25/0	36	0/-0.25	1.5	-0.05/-0.20	3.0	+0.45/+0.20	28	±0.12	1.1	0/-0.25
		DBB20W	DBB20W	20	23	+0.25/0	38	0/-0.25	1.5	-0.05/-0.20	3.0	+0.45/+0.20	31	±0.12	1.1	0/-0.25
		DBB22W	DBB22W	22	25	+0.25/0	42	0/-0.25	1.5	-0.05/-0.20	3.0	+0.45/+0.20	34	±0.12	1.1	0/-0.25
		DBB24W	DBB24W	24	27	+0.25/0	44	0/-0.25	1.5	-0.05/-0.20	3.0	+0.45/+0.20	36	±0.12	1.1	0/-0.25
		DBB25W	DBB25W	25	28	+0.25/0	48	0/-0.25	1.5	-0.05/-0.20	4.0	+0.45/+0.20	38	±0.12	1.1	0/-0.25
		DBB30W	DBB30W	30	34	+0.25/0	54	0/-0.25	1.5	-0.05/-0.20	4.0	+0.45/+0.20	44	±0.12	1.1	0/-0.25
		DBB35W	DBB35W	35	39	+0.25/0	62	0/-0.25	1.5	-0.05/-0.20	4.0	+0.45/+0.20	51	±0.12	1.1	0/-0.25
		DBB40W	DBB40W	40	44	+0.25/0	66	0/-0.25	1.5	-0.05/-0.20	4.0	+0.45/+0.20	55	±0.12	1.1	0/-0.25
		DBB45W	DBB45W	45	50	+0.25/0	74	0/-0.25	2.5	-0.05/-0.20	4.0	+0.45/+0.20	62	±0.12	1.6	0/-0.25
		DBB50W	DBB50W	50	55	+0.25/0	78	0/-0.25	2.5	-0.05/-0.20	4.0	+0.45/+0.20	67	±0.12	1.6	0/-0.25

Informazioni aggiuntive

Anche gli utenti che hanno visto questo sono interessati