AEB Accelerated ejectors - bumper type - DME - D-M-E

??

CADモデル選択

	1
	2

		LINA 部品表	REF Catalog Number ⁿ/ₐ	A Länge [mm]	B Länge [mm]	C Width [mm]	D Width [mm]	E Width [mm]	F Height [mm]	G Height [mm]	H Height [Inch]	J Width [mm]	K Länge [mm]	L Länge [mm]	M Länge [mm]	N Länge [mm]	P Height [mm]	Q Height [mm]	R Height [mm]	S Height [mm]	T Height [mm]	U Gewinde ⁿ/ₐ	V Diameter Ø [mm]	W Länge [mm]	X Länge [mm]	Y Länge [mm]	Z Länge [mm]	AA Accross-flats dimension [Inch]	BB Radius [mm]	CC Radius [mm]	DD Height [mm]	EE Height [mm]	FF Gewinde ⁿ/ₐ	GG Accross-flats dimension [Inch]

		AEB10	AEB10	53.97	26.97	28.57	15.87	14.28	40.64	27.94	1/2"	3.17	12.95	28.02	12.70	12.70	26.16	45.29	51.44	13.97	10.80	5/8-18	3.18	12.47	14.00	6.35	41.28	15/16"	6.35	6.35	19.05	9.52	5/16-18	3/8"
		AEB20	AEB20	73.03	36.50	41.28	28.57	20.64	47.63	31.75	5/8"	4.75	15.87	41.28	19.05	19.05	25.81	52.39	60.33	17.27	12.70	1 1/8-12	6.35	15.87	20.64	6.35	60.03	1 3/8"	4.76	6.35	18.29	12.70	3/8-16	9/16"

追加の情報

このページを訪れたユーザーが閲覧したその他のデータ

AEP Accelerated ejectors - Pin type - DME

AEP Accelerated ejectors - Pin type - DMED-M-E 27.11.2017

AKO Accelerated knock-outs - DME

AKO Accelerated knock-outs - DMED-M-E 08.08.2018

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material 1.2210

Flat ejector pins - hardened - FK Typ(e) DIN 1530/ISO 8693, 250°C, Material...D-M-E 27.06.2024

ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)

ULB Core blades - DME - Mat.: DME 5 (1.2344, 38-42 HRC)D-M-E 08.08.2018

N Connector plugs with teflon seal - DME

N Connector plugs with teflon seal - DMED-M-E 22.05.2024

VA Vacuum-/Compressed air-valves - DME

VA Vacuum-/Compressed air-valves - DMED-M-E 22.05.2024

CCT - CCTP Cycle counter CUMSA - DME

CCT - CCTP Cycle counter CUMSA - DMED-M-E 27.11.2017

KU Latch Locks - Baffle bars - DME

KU Latch Locks - Baffle bars - DMED-M-E 22.05.2024

MRT - DMED-M-E 27.11.2017

PSR Mini Might Schieberklammer - DME

PSR Mini Might Schieberklammer - DMED-M-E 27.11.2017

EJB - Inch Ejector Blades

EJB - Inch Ejector BladesD-M-E 02.02.2024

PN 1685 Control valves - DME

PN 1685 Control valves - DMED-M-E 27.11.2017

ZHU End caps-out - DME

ZHU End caps-out - DMED-M-E 22.05.2024

WZ 1070 Taper roller bearings - DME - Mat.: Steel - DIN 720

WZ 1070 Taper roller bearings - DME - Mat.: Steel - DIN 720D-M-E 27.06.2024