5-950.01 - Rubber Bumpers EPDM / NR - Dirak

??

Selección de modelo CAD

	1
	2
	3
	4

		LINA Lista de materiales	BESTNR Order number ⁿ/ₐ	AUS Version ⁿ/ₐ	D Diameter [mm]	DD Diameter [mm]	H Height [mm]	D1 Diameter [mm]	D2 Diameter [mm]	D3 Diameter [mm]	H1 Height [mm]	H2 Height [mm]	T Height [mm]	R Radius [mm]

		209-3001.00-00000	209-3001.00-00000	Rubber bumpers	20	18	12.0	10	4	0	0	0.0	7	2.00
		209-3002.00-00000	209-3002.00-00000	Rubber bumpers	30	25	30.0	14	4	0	0	0.0	20	2.75
		209-3003.00-00000	209-3003.00-00000	Rubber bumpers	20	19	22.5	10	4	0	0	0.0	8	2.00
		209-3004.00-00000	209-3004.00-00000	Rubber bumpers	40	38	32.0	13	6	0	0	0.0	12	6.00

Additional Information

Los usuarios que vieron esto, también se interesaron en

5-950.02 - Mushroom Type Bumpers EPDM / NR

5-950.02 - Mushroom Type Bumpers EPDM / NRDirak 15.12.2023

5-161 - Edge Protections

5-161 - Edge ProtectionsDirak 15.12.2023

5-125 - Closed cell sponge rubber seals

5-125 - Closed cell sponge rubber sealsDirak 15.12.2023

6-040 - Hexagon head screws with underhead serrations

6-040 - Hexagon head screws with underhead serrationsDirak 15.12.2023

5-110.01 - Self-Clamping Profiles EPDM

5-110.01 - Self-Clamping Profiles EPDMDirak 15.12.2023

5-151 - Clip-on Sealing Profiles EPDM / NBR

5-151 - Clip-on Sealing Profiles EPDM / NBRDirak 15.12.2023

5-171 - Radius Adapter

5-171 - Radius AdapterDirak 15.12.2023

5-110.02 - Door seals

5-110.02 - Door sealsDirak 15.12.2023

5-149 - Shielding Profiles, EPDM EMV Gasket

5-149 - Shielding Profiles, EPDM EMV GasketDirak 15.12.2023

5-131 - Window seal

5-131 - Window sealDirak 15.12.2023

5-156 - Profile for Double-DoorsDirak 15.12.2023

4-161 - 180° Hinge, 180° also with adjacent cabinets, closed cutout., Doorbend 20mm (0.787)

4-161 - 180° Hinge, 180° also with adjacent cabinets, closed cutout., Doorb...Dirak 15.12.2023

4-346 - Screw-on Hinge, Lift-off

4-346 - Screw-on Hinge, Lift-offDirak 15.12.2023

4-110 - Concealed Hinge, opening angle about 90°, for max. bending 26mm

4-110 - Concealed Hinge, opening angle about 90°, for max. bending 26mmDirak 15.12.2023