4-248 - Tenon Blocks and Anti-Twist Protection - Dirak

??

Селекция на CAD модел

	1
	2
	3
	4
	5

		265-1001.00-00000	265-1001.00-00000	Tenon blocks with anti-tw...	8mm	8 x 20 to 25 mm	M6	0 - 3,2
		265-1002.00-00000	265-1002.00-00000	Tenon blocks with anti-tw...	10mm	10 x 20 to 25 mm	M6	0 - 3,2
		265-1101.00-00000	265-1101.00-00000	Anti-twist protection for...	8mm	8 x 20 to 25 mm
		265-1102.00-00000	265-1102.00-00000	Anti-twist protection for...	10mm	10 x 20 to 25 mm
		265-1103.00-00000	265-1103.00-00000	Anti-twist protection for...		3 options, see drawing

Additional Information

Потребителите, които са гледали това, също се интересуват

6-170 - Telescopic Cover Support with Automatic Locking Device

6-170 - Telescopic Cover Support with Automatic Locking DeviceDirak 15.12.2023

6-040 - Hexagon head screws with underhead serrations

6-040 - Hexagon head screws with underhead serrationsDirak 15.12.2023

4-323 - Hinge, with PA bushings

4-323 - Hinge, with PA bushingsDirak 15.12.2023

1-100 - Quarter-Turn, Screw-in Type, Optional: Water- and dust-tight according to IP65

1-100 - Quarter-Turn, Screw-in Type, Optional: Water- and dust-tight accord...Dirak 15.12.2023

4-247 - Screw-on Hinge, for Aluminium Profiles lift-off, (examples of aplication on flat surfaces see page 4-248)

4-247 - Screw-on Hinge, for Aluminium Profiles lift-off, (examples of aplic...Dirak 15.12.2023

4-250 - Screw-on Hinge

4-250 - Screw-on HingeDirak 15.12.2023

4-152 - 180° Hinge, for single cabinets, closed cut-out

4-152 - 180° Hinge, for single cabinets, closed cut-outDirak 15.12.2023

4-707 - Torque Hinge

4-707 - Torque HingeDirak 15.12.2023

4-145 - Hinge Pr05 180°

4-145 - Hinge Pr05 180°Dirak 15.12.2023

4-701 - Torque Hinge

4-701 - Torque HingeDirak 15.12.2023

4-282 - Screw-on Hinge, Lift-off

4-282 - Screw-on Hinge, Lift-offDirak 15.12.2023

4-240 - Hinge Pr01 180°

4-240 - Hinge Pr01 180°Dirak 15.12.2023

4-135 - 120° Hinge, Concealed

4-135 - 120° Hinge, ConcealedDirak 15.12.2023

7-066 - NT- Swinghandle, Stainless Steel (IP65), for Profile-cylinders DIN ...Dirak 15.12.2023