WHT - Hardened ejector sleeve - PROPLASTICA

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	D3 Hole diameter [mm]	D1 Diameter [mm]	D2 Head diameter [mm]	K Head height [mm]	D4 Hole diameter [mm]	LMIN Minimum length [mm]	MATERIAL Material ⁿ/ₐ	DENSITY Density [kg/m^3]

		Hardened ejector sleeve W...	1.5	3	6	3	1.9	35	1.2210	7850
		Hardened ejector sleeve W...	1.6	3	6	3	2.0	35	1.2210	7850
		Hardened ejector sleeve W...	2.0	4	8	3	2.4	35	1.2210	7850
		Hardened ejector sleeve W...	2.2	4	8	3	2.5	35	1.2210	7850
		Hardened ejector sleeve W...	2.5	5	10	3	3.0	45	1.2210	7850
		Hardened ejector sleeve W...	2.7	5	10	3	3.0	45	1.2210	7850
		Hardened ejector sleeve W...	3.0	5	10	3	3.3	45	1.2210	7850
		Hardened ejector sleeve W...	3.2	5	10	3	3.5	45	1.2210	7850
		Hardened ejector sleeve W...	3.5	5	10	3	4.0	45	1.2210	7850
		Hardened ejector sleeve W...	3.5	6	12	5	4.0	45	1.2210	7850
		Hardened ejector sleeve W...	3.7	6	12	5	4.0	45	1.2210	7850
		Hardened ejector sleeve W...	4.0	6	12	5	4.5	45	1.2210	7850
		Hardened ejector sleeve W...	4.0	8	14	5	4.3	45	1.2210	7850
		Hardened ejector sleeve W...	4.2	8	14	5	5.0	45	1.2210	7850
		Hardened ejector sleeve W...	5.0	8	14	5	5.3	45	1.2210	7850
		Hardened ejector sleeve W...	5.2	8	14	5	5.5	45	1.2210	7850
		Hardened ejector sleeve W...	5.5	8	14	5	6.0	45	1.2210	7850
		Hardened ejector sleeve W...	6.0	10	16	5	6.3	45	1.2210	7850
		Hardened ejector sleeve W...	6.2	10	16	5	6.5	45	1.2210	7850
		Hardened ejector sleeve W...	6.5	10	16	5	8.0	45	1.2210	7850
		Hardened ejector sleeve W...	7.0	10	16	5	8.0	45	1.2210	7850
		Hardened ejector sleeve W...	8.0	12	20	7	10.0	45	1.2210	7850
		Hardened ejector sleeve W...	8.2	12	20	7	10.0	45	1.2210	7850
		Hardened ejector sleeve W...	8.5	12	20	7	10.0	45	1.2210	7850
		Hardened ejector sleeve W...	10.0	14	22	7	10.5	45	1.2210	7850

Additional Information